Click image to view full size image
G-single type screw pump main part includ partiality screw andfixed bush because of special geometric figure of them, it willbecome alone seal container in differentiate, medium flow by axialeven carry out, interior flow speed slowly, volume invariant,pressure steady, so there is no vortex and mix. Which exportpressure is 0.6Mpa for each enlisted grade pump. List 60m, Highdegree of attraction in ordinary. Below 80??? is fit to transportthe medium. It can reach 150??? when special requirements. Becauseof the determinant consist of various elastic material, it is mainsupply mud pump for centrifuge in the mud solid control system.
Screw pump parameters
Model | Flow (m³/h??? | Pressure???MPa??? | Max Speed ???r/min??? | Main drive ???Kw??? | Must Gas Etching???m??? | import Flange ???mm??? | Exit Flang???mm??? | Permit Particle Diameter???mm??? | Permit Fibre Diamete???mm??? |
G50-1 |
14 | 0.6 |
720 | 5.5 |
4.5 |
100 |
80 |
5 |
50 |
G50-2 | 1.2 | 7.5 | |||||||
G60-1 | 22 | 0.6 | 11 |
5 |
125 |
100 |
6 |
60 | |
G60-2 | 1.2 | 15 | |||||||
G70-1 |
38 | 0.6 | 11 |
150 |
125 |
8 |
70 | ||
G70-2 | 1.2 | 18.5 | |||||||
G85-1 |
56 | 0.6 |
630 | 15 |
150 |
125 |
10 |
80 | |
G85-2 | 1.2 | 30 |
Screw Pump,Solid Control
